Vibration velocity transducer AV04

Purpose:

Measuring vibration velocity in stationary vibrodiagnostic systems according to GOST ISO 10816 and GOST ISO 2954.

Features:

The built-in electronic amplifier-transducer converts the piezoelement signal to a low-resistance voltage signal proportional to vibration velocity.
Electric insulation of piezoelement and built-in amplifier-transducer from the body eliminates the influence of grounding loop currents on measurement results.
Robust design, waterproof casing and non-detachable armored cable.
Stable characteristics and reliable operation.

Check price with the manufacturer

Description

Documents

Parameter

Value
Conversion factor

4,4 ± 0,44 mV/mm/s
Relative coefficient of transverse conversion (less than)

0,05
Operating frequency range

2 ... 3000 Hz
Max. shock limit (peak value)

500 g
DC voltage level at the output

10 ... 23 V
Power supply

18 ... 30 V
0,1 ... 8 mA
Vibration velocity measuring range

0,1 ... 500 mm/s
0,05 mm/s
Maximum output voltage at nonlinear distortion factor not greater than 5 %

±5 V
Operating temperature range

-50 ... 125 °C
0,1 %/°С
Connector type

4*the tip of the fur. Clip
Built-in cable

2 m
Output direction

horizontal

Electric Circuit of AV04