Amplifier AP5230-8

Purpose:
  • Converting input signal from piezoelectric transducers with charge output and those with built-in electronics to voltage.
Check price with the manufacturer
Description
  • Parameter
    Value
  • Maximum input charge (peak value)
    ± 100000 pC
  • Maximum input voltage (peak value)
    ± 10 V
  • Conversion factor for charge (corresponds to a series of 1, 2, 5)
  • Conversion factor for voltage (corresponds to a series of 1, 2, 5)
  • Normalization range (increment 0.01) of conversion factor
  • Limits of basic relative error of conversion factor setting, not greater than
    ± 0,8 %
  • Operating frequency range with attenuation on the boundaries -10 %
    from 0.1 Hz (at minus 30 %) to 100,000 Hz (at minus 10 %)
  • Maximum output voltage (peak value) at nonlinear distortion factor < 5%, not lower than
    ± 10 V
  • Operating frequency range for vibrovelocity with attenuation on the boundaries -10% (set by built-in HF and LF filters)
    from 0.1 Hz (at minus 30 %) to 100,000 Hz (at minus 10 %)
  • Input resistance (higher than)
    1000000000 Оm
  • Output resistance (not higher than)
    100 Оm
  • Cutoff frequencies of built-in high pass filters (increment 0.1; 1; 10; 100 Hz) with decline in frequency response not less than 40dB/decade and attenuation -10 %
    0,1; 0,2; 1; 2; 10; 100 Hz (ФVЧ на чаstfromе sреза 0,1 Hz иmееt заtухание не более 30%)
  • Cutoff frequencies of built-in low pass filters (increment 0.1; 1; 10; 10 kHz) with decline in frequency response not less than 40dB/decade and attenuation -10 %
    1; 10; 30; 100 кHz
  • 2,6 A
  • + (12 ± 2) V
  • Powering mode of sensors
    + (24 ± 2) V
  • 5,6 ± 1,2 mA
  • Root mean square (RMS) value of noise reduced to the output, in the mode of voltage conversion (not higher than)
    20 µV
  • Root mean square (RMS) value of noise reduced to the output, in the mode of charge conversion for capacitance 1 nF (not higher than)
    0,02 pC
  • Run mode setting time after power-on or switching inputs and conversion factors (not longer than)
    10 s
  • Power supply
    mains supply from power unit
  • Connector type
    input / output
  • Overall dimensions
    481 x 260 x 45 mm
  • Weight
    4000 g
  • Delivery set
    setup CD-ROM with the program AP5230-8 Explorer; USB cable A-B; a power unit AS05-03 (~220V/=12V); capacitive transducer E1000
SUBMIT A REQUEST
I have read and accept the privacy policy
SUBMIT A REQUEST
[contact-form-7 404 "Not Found"]
Get price
I have read and accept the privacy policy
Get production catalog