Amplifier AP5110

Purpose:

Conversion and measurement of RMS of signals from piezoelectric transducers in the modes:
charge amplifier (connecting transducers with charge output);
voltage amplifier (connecting transducers with built-in electronics).

Features:

Modular structure.
Metal casing.
Balanced and unbalanced input of charge amplifier.
Input signal integration.
Normalization mode.
Overload indication.
Low level of noise.
Built-in voltmeter that measures RMS of an output signal.
Interface for connecting to computer USB.
Measurement report.

Check price with the manufacturer

Description

Documents

Parameter

Value
Maximum input charge (peak value)

± 100000 pC
Maximum input voltage (peak value)

± 10 V
Conversion factor for charge (corresponds to a series of 1, 2, 5)
Conversion factor for voltage (corresponds to a series of 1, 2, 5)
Normalization range (increment 0.01) of conversion factor
Limits of basic relative error of conversion factor setting at 200 Hz

± 0,8 %
± 1,6 %
Maximum output voltage (peak value) at nonlinear distortion factor < 5%, not lower than

± 10 V
Operating frequency range with attenuation on the boundaries -10 %

0,2 (at the level minus 30 %) ... 100000 Hz (at minus 10 %)
2 … 2000 Hz
Frequency-response ripple

± 0,5 %
± 2,0 %
Input resistance (higher than)

1000000 кОm
Output resistance (not higher than)

100 Оm
Acceptable additional relative error limits of conversion factor for charge in the operating temperature range 0 to 50 °C
Cutoff frequencies of built-in high pass filters (increment 0.1; 1; 10; 100 Hz) with decline in frequency response not less than 40dB/decade and attenuation -10 %

from 0, 2 to 200 Hz (ФVЧ на чаstfromе sреза 0,2 Hz иmееt заtухание не более 30 %)
from 2 to 200 Hz
Cutoff frequencies of built-in low pass filters (increment 0.1; 1; 10; 10 kHz) with decline in frequency response not less than 40dB/decade and attenuation -10 %

from 0,1 to 100 кHz
1; 2 кHz
Basic relative error limits for RMS value of the output signal voltage in the range from 100 mV to the maximum and within frequencies from 20 to 100 000 Hz

± 1 %
700 mA
Powering mode of sensors

+ (22 ± 2) V
from 3 to 15 mA (To be determined by customer)
Root mean square (RMS) value of noise reduced to the input, in the mode of voltage conversion in the frequency range from 3 Hz to 30 kHz (maximum)

20 µV
Root mean square (RMS) value of noise reduced to the input, in the mode of charge conversion for sensor capacity 1 nF in the frequency range from 3 Hz to 30 kHz (not higher than)

0,02 pC
Power supply

self-contained power supply, mains supply from adapter
Connector type

input / output
Delivery set

The amplifier of the measuring AP5110; Passport; operator's Manual; shielding Plug; Installation CD-ROM program AP5110 Explorer; USB Cable A-B; user Manual; power Unit AS05-01 (~220 V/=12 V, >= 1 A ) ; cable Plug TWIN BNC; Capacitive transducer E1000

Габаритный чертеж