Amplifier AP5000-001-01

Purpose:

Converting high-impedance charge signal from a piezoelectric transducer (vibration transducer, force sensor, dynamic pressure sensor, etc.) to a low-impedance voltage signal.

Features:

Can be used at long communication lines (up to 100 m), almost without reducing sensitivity or limiting the low frequency region.
Low intrinsic noise.

Check price with the manufacturer

Description

Documents

Parameter

Value
Conversion factor for charge

1 mV/pC
Operating frequency range at the level of -3 dB

0,5 … 50 000 Hz
RMS value of intrinsic noise in the range of 1 ... 22 000 Hz

5·10-6 pC
RMS value of intrinsic noise in the range of 1 ... 50 000 Hz

5·10-6 pC
Output resistance (not higher than)

500 Оm
Maximum amplitude of output voltage at load resistance 10 kOhm and nonlinear distortion factor not greater than 5 %

± 5 V
Acceptable additional relative error limits of conversion factor for charge in the operating temperature range - 40 ... + 85 °C

± 2 %
Powering mode

18 … 30 V
2 … 20 mA
2 … 20 mA
2 … 20 mA
DC voltage level at the output

8 … 13 V
Connector type

input / output
Operating temperature range

- 40 … + 85 °C
Weight

36 g
Delivery set

power units AS01, AS07; matching device AG01, AG02
Options

TEDS (Technology survey Transducer Electronic Data Sheet - spreadsheets, sensor data, automatically identify the sensor type and its technical characteristics in accordance with IEEE P1451.4)

Electric Circuit of AP5000-001-01